Omron V430-F Series User Manual For Communication Settings page 30

2 Controlling Operation and Data Output with Parallel
How to Assign the Output Signals
The Output signals can be assigned using WebLink.
1
From the WebLink screen, select Setup → Outputs.
2
The Digital Output Editor dialog opens.
3
The Output condition for each Output signal can be set or changed in Output On.
4
Advanced Settings for Trend Analysis, Symbol Quality and Diagnostic Warning are displayed
by clicking on the Text string at the bottom of the Output setting screen. Here you can change
any settings as needed.
2 - 10
V430-F Series Auto Focus Multi Code Reader User Manual for Communication Settings (Z407-E1)