Table of Contents
Advertisement
Figure 15. Select the printer network
Once the device indicates it has established a network connection, it is ready to log into the WiFi
Configuration and Management interface.
Note: Some systems report a warning when connecting to the printer AP because there is no
internet connection provided. This warning should be ignored.
Logging into the WiFi configuration and management interface
The printer provides web pages for setup and other management. After connecting to the printer
AP network, log into the web pages for setup.
1.
Open the browser and enter the AP IP address shown on the test receipt.
2.
When prompted, enter the username admin and the password Admin.
The Quick Setup page should open as shown below.
Note: If the WiFi adapter had been previously configured the status page will open rather
than the Quick Setup.
Chapter 3. Installing and configuring the 4610 printer
33
Hide quick links:
Advertisement
Table of Contents
