Table of Contents
Advertisement
Chapter 3. Installing and configuring the 4610 printer
Installing and configuring the 4610 printer
This section provides safety information, and steps on installing and configuring your printer.
Before you begin
Before you install your SureMark
Information manual, GC32-0609.
Verify your order
Your order should contain the following components:
• 4610 printer
• Safety manual
• Ribbon
• Paper roll (specified by the customer)
• Customized printer options (packaged separately), including:
• Interface card (a RS-232, RS-485, USB, or Ethernet, or WiFi)
• Fillers
• Cables
• Power bricks
Understanding your configuration
Your printer can be set up in an integrated or distributed configuration. An integrated
configuration has all parts of a system assembled in one location. A distributed configuration is
set up with the parts of the system in different physical locations. In an integrated configuration,
you can install the printer on the input/output tray option (with the fillers that contains the
printer and display) on top of the wide-footprint system units. Other tray options include
mounting the printer on the full-size cash drawer or directly on the counter.
Installing the interface card
The interface card (either an RS-232, RS-485, USB, Ethernet, or WiFi interface) is shipped in a
separate box with your printer. To install the interface card, complete the following steps:
Copyright Toshiba Global Commerce Solutions, Inc. 2017
©
™
printer, be sure to read this section and the Safety
29
Hide quick links:
Advertisement
Table of Contents
