Clearing Jams In The Check Flipper Area; Cleaning The Thermal Printhead - Toshiba SureMark 4610 2CR Hardware Manual

Detailed View of Thermal Printhead
Figure 28. Cleaning the thermal printhead
2. Using a cotton swab soaked in isopropyl alcohol, gently wipe the printhead several times on
its print line and on the surrounding area.
3. Wipe off any residual alcohol with a dry swab.
If print quality does not improve after cleaning the thermal printhead, contact your Toshiba
Global Commerce Solutions service Representative.

Clearing jams in the check flipper area

If a check jams in the check flipper mechanism, you can remove the flipper door to clear the jam.
Complete the following steps to clear a paper jam:
Thermal Printhead
Paper Cover
Chapter 4. Using and maintaining the 4610 printer
51