Safety; Intended Use; General Safety Instructions; Organizational Measures - PI L-412.039211E0 User Manual

3 SAFETY

3 Safety
3.1

Intended Use

The L-412.xx9211E0 is a laboratory device as defined by DIN EN 61010-1. It is intended for
indoor use and use in an environment that is free of dirt, oil, and lubricants.
In accordance with its design, the L-412.xx9211E0 is intended for positioning, adjusting and
shifting loads in one axis at various velocities. The L-412.xx9211E0 is not intended for
applications in areas, in which a failure would present severe risks to human beings or the
environment.
The intended use of the L-412.xx9211E0 is only possible when completely mounted and
connected. The thermal protection sensor built into the L-412.xx9211E0's motor must be
evaluated and monitored. The L-412.xx9211E0 must be operated with suitable electronics.
The electronics are not in the scope of delivery of the L-412.xx9211E0.
The L-412.xx9211E0 may not be used for purposes other than those stated in this user
manual. The L-412.xx9211E0 may only be used in compliance with the technical
specifications and instructions in this user manual.
3.2

General Safety Instructions

The L-412.xx9211E0 is built according to state-of-the-art technology and recognized safety
standards. Improper use of the L-412.xx9211E0 may result in personal injury and/or damage
to the L-412.xx9211E0.
► Use the L-412.xx9211E0 only for its intended purpose and if it is in perfect condition.
► Read the user manual.
► Eliminate any faults and malfunctions that are likely to affect safety immediately.
The operator is responsible for correct installation and operation of the L-412.xx9211E0.
3.3

Organizational Measures

3.3.1

User Manual

► Always keep this user manual available with the L-412.xx9211E0. The latest versions of the
user manuals can be
► Add all information from the manufacturer such as supplements or technical notes to the
user manual.
► If you give the L-412.xx9211E0 to a third party, also include this user manual as well as
other relevant information provided by the manufacturer.
► Only use the device on the basis of the complete user manual. Missing information due to
an incomplete user manual can lead to serious or fatal injuries and damage to equipment.
► Only install and operate the L-412.xx9211E0 after you have read and understood this user
manual.
3.3.2

General Personnel Qualification

The L-412.xx9211E0 may only be installed, started up, operated, maintained, and cleaned by
authorized and appropriately qualified personnel.
7
L412M0016EN ‒ 3/14/2019
downloaded (p. 6) at www.pi.ws.
M O T I O N | P O S I T I O N I N G