Special Functionality: Vehicle Speed; Setting Up Calculated Speed - Bosch M 60 Manual

10.5.1 Special Functionality: Vehicle speed

10.5.2 Setting up calculated Speed

Bosch Motorsport
a)
b)
a) Channels available in computed sources.
b) Available measurements for channel.
c) Calculation of hysteresis channel.
This functionality allows:
– High performance vehicle owners to measure wheel spin under acceleration and
wheel slip/lock under braking.
– Calculating vehicle 'speed over ground'.
Vehicle speed calculation function
– Calculating vehicle speed of 2 wheel drive: (Wheel speeds of non-driven axle as in-
put).
Calculated speed is average of both speeds if speed difference between wheels
< limit.
Calculated speed is maximum of both speeds if speed difference between wheels
> limit.
– Calculating vehicle speed of 4 wheel drive: (Wheel speeds of all wheels as input).
Calculated speed is speed of 2nd fastest wheel.
1. Click on tab 'System Overview'.
2. Click on 'Measurement Sources' in the Toolbox.
Modular Sensor Interface M 60
Analog and Frequency Inputs | 10
c)
65 / 104