Can Output; Output Configuration; Create New Can Output Message Channel - Bosch M 60 Manual

9.3.1 Output Configuration

9.3.2 Create new CAN Output Message Channel

Bosch Motorsport
6. Click 'Next'.
If a measurement channel belongs to more than one source (e.g. M 60 and ECU MS
5.1), the 'Solve Label Ambiguity' window opens.
7. Assign the ambiguous channels to the desired source.
8. Click 'Finish'.

9.3 CAN Output

This chapter describes the CAN Output Channel of the M 60.
a) Open CAN output message.
b) Create new CAN output message.
c) Export RaceCon CAN output configuration to file.
d) Import RaceCon CAN output configuration from file.
e) Display CAN bus properties (Baudrate).
1. Right-click on CAN Output of desired bus (CAN1 or CAN2).
Modular Sensor Interface M 60
CAN Bus | 9
a)
b)
c)
d)
e)
43 / 104