Bosch M 60 Manual page 56

10 | Analog and Frequency Inputs
56 / 104
The third part of the 'Characteristic Curve Wizard' opens. Working with automatically
created measurement sheets is explained in chapter '11.2 Setting up an online meas-
urement'.
a) Physical limits of channel.
b) Enter physical limits of the channel.
c) Choose data type of the measurement.
d) This sensor does not need offset calibration.
e) Enter name to automatically create a new measurement sheet.
7. Click 'Finish' when done.
8. Enter channel name and description.
9. Click 'OK' when done.
The channel is inserted into the M 60 Project Tree.
a)
b)
a) Channel is linked to ANA05.
b) Available measurements for channel.
c) Input pin pull-up resistor is activated.
d) Characteristic curve for sensor.
e) Adjustment is disabled.
Available measurements for channel
Measurement label
raw_name
raw_name_fi
name
name_fi
Modular Sensor Interface M 60
d)
e)
c)
Function
mV value of sensor
filtered mV value of sensor
physical value of sensor
filtered physical value
Bosch Motorsport