Product Description; Intended Use; Prerequisites; Hardware - Bosch BEA 060 Original Instructions Manual

3.

Product description

3.1

Intended use

The exhaust gas analyzer BEA 060 permits the user-
friendly performance of exhaust gas measurements on
gasoline vehicles.
The range of test specimens includes the entire spec-
trum of gasoline road vehicles on which emission mea-
surements have to be taken during workshop inspec-
tions, both to comply with legal requirements and for
the purposes of localizing and rectifying faults.
The BEA 060 can be used as a stand-alone unit and
with the BEA 550.
!
If the BEA 060 and the supplied accessories are
operated contrary to the way specified by the manu-
facturer in the operating instructions, the protection
provided by the BEA 060 and the supplied accesso-
ries may be compromised.
3.2

Prerequisites

The BEA 060 can only be operated by way of a PC/
Laptop and together with SystemSoft BEA-PC.
3.2.1

Hardware

R
PC/Laptop with DVD/CD drive and Win XP, Win 7 or
Win 8 operating system
R
CPU X86 (Celeron M): At least 1 GHz,
recommended Dualcore 1.66 GHz
R
Available space on hard disk: At least 1 GB
R
RAM: At least 1 GB
R
Two vacant USB interfaces for the Bluetooth USB
adapter and for a USB connecting cable
3.2.2

Software

SystemSoft BEA-PC installed on PC/Laptop.
3.3

Scope of delivery

i
The scope of delivery depends on the product variant
ordered as well as the special accessories ordered,
and can deviate from the following list.
Designation
BEA 060
3.4

Special accessories

Information on special accessories can be obtained
from authorized Bosch dealers.
Robert Bosch GmbH
3.5
!
The BEA 060 is only to be operated in enclosed work-
shop areas. Protect the BEA 060 against moisture.
The BEA 060 consists of a computer PCB with tempera-
ture, speed and exhaust gas measurement. Communica-
tion between the PC/Laptop and the BEA 060 can take
place either by way of a Bluetooth connection or a USB
connection.
18
17
16
15
14
Fig. 1:
1 Coarse filter GF2
2 Coarse filter GF3
3 Mains connection
4 Holes for cable tie (power cord strain relief)
5 Measurement gas inlet
6 Activated charcoal filter AF1
7 O sensor
2
8 Measurement gas outlet
9 Condensate outlet
10 Test gas inlet
11 NO sensor
12 Connection for cigarette lighter socket connecting cable
13 USB connection
14 Connection for connecting cable 1 684 463 810
BDM 300
15 Connection for oil temperature sensor
16 LED
17 On/Off button
18 Carrying handle
Special accessories
1)
3.6
Order number
LED
1 687 023 613
Off
Alternate orange and green flashing
at one-second intervals
Rapid alternate orange and green
flashing
Rapid alternate orange and green
flashing (BEA software not started)
Red light
Product description | BEA 060 | 19

Description of unit

BEA 060
GF 3
O2 AF I
N0
11-16V
20 W
13 12 11 10 9 8 7 6
BEA 060
1)
1)

LED status

1 689 989 182
en
GF 2
1
2
3
459907_1Ko.eps
5 4
1)
to BEA 040/
1)
Status
BEA 060 off
BEA 060 on and
ready for operation
USB or Bluetooth
communication with
BEA software
Firmware defective
BEA 060 defective
|
2016-12-14