8.2.1 Creating a new Condition Channel
Bosch Motorsport
8.2 Condition Channels
Condition channel
– Logical operations on measurement channel(s)
– If-Else structure with reset
– Logical result
– Result can be used as input source for alarm display elements and further calculations
in the whole RaceCon project
Condition combination
– Combination of several (up to 16) condition channels for more complex calculations
– Logical result
All condition channels can be used globally in the whole M 60 project.
Follow the steps shown in the screenshot.
a) Double-click on 'Conditional Channels' in Project Tree.
b) Click on 'Add condition'.
The 'create/edit condition' window appears.
Define the condition channel using the following configuration possibilities:
Modular Sensor Interface M 60
Math and Condition Channels | 8
31 / 104