ABB -free@home WBI-S-1-xx-WL Series Product Manual page 18

3.8.4 Staircase lighting (only universal detector via connection of external sensor)
If a push-button connected to the universal detector is to be used for switching staircase
lighting, the "Staircase lighting sensor" function is to be selected.
In the configuration of the associated switch actuator (to which the lamps of the staircase are
connected), the "Switch-off delay" can be configured.
The switch-off delay indicates how long a channel of the switch actuator remains in the ON
state after being switch on. If the staircase lighting has already been switched on by the press of
a push-button, the switch-off delay can be extended (retriggered) by a renewed press of the
push-button.
3.8.5 Sensor force-position ON/OFF (only universal detector via connection of external
sensor)
If several universal detectors are connected to a channel of a switch actuator, this channel can
initially be operated from all universal detectors.
After configuring a channel of the linked universal detector with the "Force-position sensor
ON/OFF" function, the force-position of the sensor for the channel of the switch actuator can be
activated or deactivated with a press of the push-button of the rocker connected to this channel.
After the activation the operation of the affected switch actuator channel is blocked by all other
devices. In the parameter settings of the switch actuator the forced behaviour can be
configured, and it can be specified whether the channel of the switch actuator concerned is to
be switched on (Force-position ON) or off (Force-position OFF).
3.8.6 Blind force position (only universal detector via connection of external sensor)
This function makes possible a forced behaviour of blinds via the blind actuator.
The forced behaviour can be configured in the parameter settings of blind actuator: The
associated blinds (or roller blinds or awnings) can be moved to the top end position (Force-
position top) or to the bottom end position (Force-position bottom).
3.8.7 Movement detector sensor (only universal detector via connection of external sensor)
This function must be selected when a movement detector is connected to the universal
detector for the control of lights.
If the universal detector is connected with a switch actuator, the duration of the light of the
lamps connected to the switch actuator can be set via parameter "Switch-off delay" in the
parameter settings. The duration of the light extends again automatically by the switch-off delay
if persons continue to be detected by the movement detector.
Product manual 2CKA001473B9425
Setup and function
│18