ABB -free@home WBI-S-1-xx-WL Series Product Manual page 28

5.3.3 Requirements for installing the universal detector
Positioning the universal detector and magnetic contact:
B
<10 mm
Product manual 2CKA001473B9425
A A
B
<10 mm
Connection and installation
Fix the position of the universal
■
detector.
The position of the supplied magnetic
■
contact can be fixed on both sides of
the universal detector.
The reference mark of the universal
■
detector (A) must be in line with the
centre of the magnet (B).
The distance between the magnet
■
and the universal detector must not
be greater than 10 mm.
The connection between the magnet
■
and the universal detector must be
sufficiently separated, e.g. when
tilting the window.
│28