ABB -free@home WBI-S-1-xx-WL Series Product Manual page 14

Icon of the user
interface
Table 4: Universal detector functions (via connection of external sensor)
Note
Special features of battery-operated detectors:
–
–
–
–
–
Product manual 2CKA001473B9425
Information
Name: Sensor (rocker)
Control element for the control of free@home functions
Name: Movement detector
Sensor for movement- and brightness-dependent control of free@home
functions
Name: Window contact
Signals "Window open" (Application: automatic deactivation of heating when the
window is open)
Name: Frost alarm
Triggers a frost alarm (Application: Automatic retraction of the blinds, roller
blinds or awnings)
Name: Rain alarm
For the detection of a rain alarm (Application: Automatic retraction of the blinds,
roller blinds or awnings)
Name: Wind alarm
For the detection of a wind alarm (Application: Automatic retraction of the blinds,
roller blinds or awnings)
Name: Switchover heating/cooling
Is used for the switchover of heating/cooling in two-pipe heating/cooling systems
It is not possible to assign it the function as blind sensor.
Light switching can be carried out, for example, via the "Control element"
(rocker) function. However, for this a direct connection with the switch
actuator must be available.
Only "On/Off" can be activated for the dimming function.
No change is possible between contact types "Normally closed contact" and
"Normally open contact".
Only the following statuses are signalled:
Universal detector: open, closed
■
Setup and function
│14