ABB -free@home WBI-S-1-xx-WL Series Product Manual page 29

5.3.4 Installation of universal detector
Warning! – Risk of damage
Damage to the universal detector due to incorrect mounting material
–
Note
Insert the battery only directly before programming starts.
The magnet and the universal detector can be either glued on or screwed on.
To install the device, perform the following steps:
Gluing:
Note
The maximum adhesive strength is reached after 24 hours.
Product manual 2CKA001473B9425
Use only the screws that are supplied for installing the universal detector.
Connection and installation
1. Glue the universal detector and the
magnet with the supplied adhesive
film on any smooth, clean and
grease-free surfaces.
│29