Description Of Functions - ABB -free@home WBI-S-1-xx-WL Series Product Manual

3.8

Description of functions

Note
Special feature of universal detector:
The device has two channels. One channel for the internal magnet contact and
one channel for an external contact. The two channels are evaluated
independently.
3.8.1 Rocker (only universal detector via connection of external sensor)
The "Rocker" function is used when push-buttons are connected to the universal detector.
Depending on whether single or double push-buttons are used, this must be set in "Device
configuration" in the main menu of the System Access Point. There the respective detector must
be selected, and then in field "Channel selection" to select the coupling of two channels for the
connection of a multiple push-button.
Note
Channels can only be coupled as long as they have not been allocated to other
free@home devices in menu "Devices" of the System Access Point.
3.8.2 Switching of (light) electric circuits (only universal detector via connection of external
sensor)
If the rocker function is used in connection with a switch actuator, for switching a lamp, for
example, the "Control element" function must be selected. However, for this a direct connection
with the switch actuator must be available.
3.8.3 Switching and dimming of lamps (only universal detector via connection of external
sensor)
If a single or double push-button connected to the universal detector is to be used together with
a dimmer to dim a lamp, the "Dimming sensor" function must be selected. Only "On/Off" can be
activated for the dimming function.
Product manual 2CKA001473B9425
Setup and function
│17