VTI Instruments EX1629 User Manual page 103

Command
vtex1629_set_shunt_enabled
vtex1629_set_shunt_source
vtex1629_set_shunt_value
vtex1629_set_strain_units
vtex1629_set_synch_source
vtex1629_set_tare
vtex1629_set_teds_data
vtex1629_set_trigger_count
vtex1629_set_trigger_delay
vtex1629_set_trigger_source
vtex1629_set_trigger_source_timer
vtex1629_set_trigger_timer
vtex1629_set_unstrained_voltage
vtex1629_soft_arm
vtex1629_soft_synch
vtex1629_soft_trig
vtex1629_store_current_config
vtex1629_trig_init
vtex1629_unlock
vtex1629_write_teds_MLAN
vtex1629_zero_cal
EX1629 Command Set
www.vtiinstruments.com
Description
Enables or disables the shunt resistors for a
particular list of channels.
Sets the shunt source for a given list of
channels.
Sets the value of a shunt resistor based on a
given channel and shunt source.
Determines whether the EX1629 will return
strain measurements in units of strain (ε) or
microstrain (µε) for a given list of channels.
Sets the sample clock source.
Sets the tare values for a list of channels.
Writes data to a TEDS device on a particular
channel.
Sets the trigger count for the EX1629.
Sets the trigger delay for the EX1629.
Sets the trigger source on the EX1629.
A convenience functions that makes calls to
several other driver functions.
Sets the trigger timer for the EX1629.
Sets the unstrained voltage for a list of channels
Sends a software generated ARM event to the
EX1629.
Sends a software generated synchronization
event to the device.
Sends a software-generated TRIG event to the
EX1629.
Stores the current configuration of the
instrument in the nonvolatile storage.
Initiates the trigger system.
Unlocks the EX1629 instrument.
Writes a variable sized block to a TEDS
EEPROM.
Resets the offset values of the unit before a
measurement is taken.
103