Vtex1629_Set_Cal_Out - VTI Instruments EX1629 User Manual

F P
UNCTION ROTOTYPE
ViStatus _VI_FUNC vtex1629_set_cal_out (ViSession vi, ViInt32 outMode);
F P
UNCTION ARAMETERS
vi = contains a session handle to the instrument. This handle is obtained by the function and remains valid until the
session is closed.
outMode = an integer input value that indicates the desired output of the calibration source. See the Description
section below for more information.
D I R V
ATA TEM ESET ALUE
Not applicable to this function.
D
ESCRIPTION
This function sets the calibration input source to a specified voltage. Possible values for the outMode parameter are:
VTEX1629_CAL_OFF (turns the calibration source off)
VTEX1629_CAL_ON (turns the calibration source on)
VTEX1629_CAL_SHORT (shorts the calibration source jacks)
VTEX1629_CAL_VREF (outputs precision calibration voltage source)
The vtex1629_set_cal_source function is used to configure the precision calibration voltage source.
NOTE This function is intended for factory use only.
EX1629 Command Set

vtex1629_set_cal_out

www.vtiinstruments.com
239