Dedicated Line And Dialup Network Modems; Connecting Cables - Siemens SINAUT ST7 System Manual

A.4

Dedicated line and dialup network modems

Modems for dedicated line and dialup networks
Note
Discontinuation of modules
The following products have the product status "type discontinued" but if they exist can be
operated with the communications moduel:
• Modem MD2
Dedicated line modems
Product notification on the Internet:
Link: (https://support.industry.siemens.com/cs/ww/en/view/109740149)
• Modem MD3
Modems for analog dialup networks
Product notification on the Internet:
Link: (https://support.industry.siemens.com/cs/ww/en/view/109740148)
• Modem MD4
Modems for ISDN networks
Product notification on the Internet:
Link: (https://support.industry.siemens.com/cs/ww/en/view/67637816)
When using the serial interface for dedicated line and dialup networks, use suitable products
of other vendors.
A.5

Connecting cables

A series of standard connecting cables is available to connect individual SINAUT
components with each other and to WANs. The following connecting cables can be ordered
as required.
SINAUT ST7 - Volume 1
System Manual, 11/2018, C79000-G8976-C178-12
A.4 Dedicated line and dialup network modems
Accessories
123