Installation; Dimensions Of The Tim - Siemens SINAUT ST7 System Manual

EXPLOSION HAZARD
You may only connect or disconnect cables carrying electricity when the power supply is
switched off or when the device is in an area without inflammable gas concentrations.
EXPLOSION HAZARD
Do not open the device when the supply voltage is turned on.
4.2

Installation

4.2.1

Dimensions of the TIM

Dimensions for installation
The specifications for the installation dimensions of the components are required to design
the mechanical structure of a SINAUT ST7 system.
Table 4- 1
Module
TIM 3V-IE /
TIM 3V-IE Advanced
TIM 4R-IE
Note the additional space required for the power supply, the CPU, input and output modules
and any other modules such as modems.
SINAUT ST7 - Volume 1
System Manual, 11/2018, C79000-G8976-C178-12
WARNING
WARNING
Dimensions for installation of the SINAUT ST7 components
Installation, connecting up, commissioning
Width Height
40 mm 125 mm
80 mm 125 mm
Depth
120 mm with closed
front flap
Max. 150 mm with open
front flap
120 mm with closed
front flap
Max. 180 mm with open
front flap
4.2 Installation
Mounted on
S7 rail
S7 rail
89