System Manual, 11/2018, C79000-G8976-C178 - Siemens SINAUT ST7 System Manual

Preface
Edition 07/2009 of the manual (C79000-G89xx-Cxxx-07)
New functions:
● New version "SINAUT ST7 configuration software for the PG/PC" V5.0
– The Ethernet TIMs can be configured for communication via the MSC protocol. This
– The time slot method can now also be configured with the "SINAUT ST7 configuration
The configuration software Version V5.0 can be used with STEP 7 as of Version V5.4
Service Pack 4.
The configuration software version V5.0 is supported by the following operating systems:
– Windows XP Professional SP2
– Windows Server 2003 SP2
– Windows Vista 32 Bit Ultimate and Business (with or without SP1)
● New firmware version V2.0 for all Ethernet TIM modules
The new firmware supports the MSC protocol.
Validity of the manual:
● SINAUT ST7 configuration software for the PG/PC V5.0
● SINAUT TD7 library for the CPU V2.2
● SINAUT TIM firmware V4.3.9 for the TIM 4
● SINAUT TIM firmware V2.0 for the TIM 3V-IE variants
● SINAUT TIM firmware V2.0 for the TIM 4R-IE
Edition 05/2007 of the manual (C79000-G89xx-Cxxx-06)
New functions:
● New product "TIM 4R-IE" for connecting SINAUT via WAN and Ethernet
● New product version "SINAUT ST7 configuration software for the PG/PC" V4.1
Validity of the manual:
● SINAUT ST7 configuration software for the PG/PC V4.1
● SINAUT TD7 library for the CPU V2.2
● SINAUT TIM firmware V4.3.7 for the TIM 3 / TIM 4
● SINAUT TIM firmware V1.2 for the TIM 3V-IE variants
● SINAUT TIM firmware V1.0 for the TIM 4R-IE
12
allows the use of the GPRS/GSM modem SINAUT MD720-3 even in SINAUT in
Internet/GPRS networks. An encrypted connection can be established from an
Ethernet TIM to the Internet via a DSL modem.
software for the PG/PC" as of V5.0 for a master TIM without DCF7 receiver, if a
TIM 4R-IE with an Ethernet connection to an ST7cc/ST7sc PC is used as the master
TIM.
SINAUT ST7 - Volume 1

System Manual, 11/2018, C79000-G8976-C178-12