Preface - Siemens SINAUT ST7 System Manual

Preface

Validity of the manual
This manual is valid for the following Ethernet TIM modules:
● TIM 3V-IE
Article number 6NH7800-3BA00
● TIM 3V-IE Advanced
Article number 6NH7800-3CA00
● TIM 4R-IE
Article number 6NH7800-4BA00
Hardware revision level 4
Firmware version V2.7
Communication module for SIMATIC S7-300 and S7-400, SINAUT ST7 protocol
For the required software versions, see the "Software requirements" section.
Article number, hardware revision level and MAC addresses are engraved on the enclosure.
Figure 1
The following communication modules of the SINAUT ST7 telecontrol system are not
described in this system manual:
● TIM 1531 IRC
● CP 1243-8 IRC
● CP 1542SP-1 IRC
● RTU3000
Links to the manuals of these modules can be found in the bibliography in the appendix.
There you will also find links to the manuals of the SINAUT ST7cc and SINAUT ST7sc
control center systems.
SINAUT ST7 - Volume 1
System Manual, 11/2018, C79000-G8976-C178-12
SIMATIC S7-300 with TIM 3V-IE Advanced (left) and TIM 4R-IE (right)
3