System:date; System:error[:Next]; System:error:all; System:error:code[:Next] - Rohde & Schwarz ZPH Series User Manual

®
R&S Cable Rider ZPH
Example:
SYSTem:DATE <Year>, <Month>, <Day>
This command sets the date for the internal calendar.
Parameters:
<Year>
<Month>
<Day>
Example:

SYSTem:ERRor[:NEXT]?

This command queries the oldest entry in the error queue and deletes it.
This command is a query and therefore has no *RST value.
Example:
Usage:

SYSTem:ERRor:ALL?

This command queries the complete error queue.
This command is a query and therefore no *RST value.
Example:
Usage:

SYSTem:ERRor:CODE[:NEXT]?

This command queries the code of the next error in the error queue.
This command is a query and therefore has no *RST value.
Example:
Usage:
User Manual 1321.0950.02 ─ 07
REFerence
Input for external reference signal.
TRIGger
Input for external trigger.
BIAS
BIAS port.
*RST: TRIGger
SYST:BNC:MODE BIAS
Sets the BNC socket to bias.
Range: 1980 to 2099
Range: 1 to 12
Range: 1 to 31
SYST:DATE 2000,6,1
Sets the date to 1/6/2000.
STAT:ERR?
Query only
SYST:ERR:ALL?
Query only
STAT:ERR:CODE?
Query only
Remote Commands
Remote Control - Commands
519