Daikin 4MXL-T Series Service Manual page 275

SiUS121827E
Wireless Remote
Factory set is 1. Change the wireless remote controller address setting by the following steps, if
necessary.
Controller
1. Hold down
Address
2. Press
3. Press
4. Press RESERVE button to confirm the setting.
5. Hold down
Part 7 Trial Operation and Field Settings
button and
field setting mode. (SETTING is indicated on the display).
FAN button and select display setting ( or ). Each time the button is pressed, the
display switches between and .
button and button to set the address.
Address can be set from 1 ~ 6, but set it to 1 ~ 3 and to same address as the receiver. The
receiver does not work with address 4 ~ 6.
/TEST button to quit the field setting mode and return to the normal display.
Mode
Address
Multiple setting
/TEST button at the same time for at least 4 seconds to enter the
Field Settings
3
2
4
1
5
(R25067)
269