Troubleshooting for Outdoor Unit
7.10 Input Overcurrent Detection
E8
Error Code
Outdoor Unit LED
A j 1 h 2 i 3 h 4 i 5 h
Display
Method of Error
Detected by checking the input current value
Detection
Error Decision
The input current is at a certain value (depending on the condition) for 2.5 seconds.
Conditions
The compressor halts if the error occurs, and restarts automatically after 3-minute standby.
Supposed
Outdoor temperature is out of operation range.
Causes
Defective compressor
Defective power module
Defective outdoor unit PCB
Short circuit
212
SiUS121827E
Part 6 Service Diagnosis