Annex 3 -Using Scip Tester With A Borehole Probe - GDD Instrumentation TDLV Instruction Manual

Annex 3 –Using SCIP Tester with a borehole probe
Get apparent resistivity and chargeability (IP) measurements by using SCIP with a borehole probe.
It's easy to use, compact, and fast with low power consumption. SCIP is rugged, portable and can
be used under any field conditions. Plus, it provides real-time feedback of your ore physical
properties.
The GDD SCIP probe has four electrodes which allow sending current (Ix) and reading voltage (Vp).
Since the probe is foldable, the length can be reduced from 1.67 meters to 0.68 meter to facilitate
transport. You can build your own or use the GDD SCIP probe.
The borehole SCIP probe is very useful for detail IP surveys in drill holes. The probe can be used in
Dipole-Dipole or Wenner configuration according to the electrode connections.
Dipole-Dipole configuration Wenner configuration
Instrumentation GDD Inc. 2018-09-18 Page 72