Table of Contents
Advertisement
WARNING: Never pull the battery while the unit is running (even if frozen). Removing the
battery while the unit is running could lead to internal storage memory corruption.
11.2 Bluetooth Partnership
To avoid wasting time searching for Bluetooth devices, a Bluetooth partnership must be established
between the Archer
GDD before the unit was sent out. However, it is possible that you might have to reconfigure it
and here are the instructions:
1. Turn on the SCIP tester and place the Cable/Wireless switch in Wireless position.
2. Turn on the Archer
Instrumentation GDD Inc.
2
PDA and the SCIP tester before connecting. This partnership was set up by
2
Field PC.
3. Make sure the Bluetooth is on. If the icon
is gray, click on the icon to enable it.
4. Click on the Bluetooth icon in the Title
Bar.
5.
Click on Add new device...
2018-09-18
Page 65
Advertisement
Table of Contents
