Table of Contents
Advertisement
Follow steps 8 to 10 of Section 6 – Quick Start Guide to begin the measuring process.
For step 11, set these parameters: Tx line number, Rx line number, line direction, transmitter
position and receiver position.
Enter a line number and select the line direction. A negative number cannot be entered for the
line; the labels N, S, E and W are used to define the direction.
Enter the transmitter and receiver electrodes position. A negative number is used to define South
and West. Use the Increment setting to increment all stations evenly at the same time. Enter the
number of the increment and click on the INC button to increment all stations.
Tx position
Rx position
Follow steps 12 to 21 of Section 6 – Quick Start Guide to complete the measuring process.
Instrumentation GDD Inc.
2018-09-18
First electrode
Second electrode
First electrode
Second electrode
Page 40
Advertisement
Table of Contents
