Problem :
This message appears when clicking on START to begin the measuring process:
Solution :
Click OK to close the pop-up window. Go to TOOLS | Config | Windows and select a timing of
0.5, 1, 2, 4 or 8 seconds.
Problem:
The screen of the Archer
continuously for more than one minute.
Solution:
If the
normal, especially if you checked the Fullwave option. Depending on the amount of data, a
fullwave file can take more than five (5) minutes to be created.
When the Archer
appears and click on Reset.
If the Power Button menu does not appear, hold the On/Off key for a full count of 20
seconds (Hard Reset) even through the blue screen with sliders, if it appears.
Instrumentation GDD Inc.
2
is frozen, nothing happens after a click, or the
icon turns continuously after clicking on Save when you create a file, this is
2
seems to be frozen, press the On/Off key until the Power Button window
2018-09-18
icon turns
Page 64