Solution :
Look at the Bluetooth icon in the Dashboard:
If it is gray, click on the icon to enable it.
Try to start the SCIP software in Bluetooth mode again.
The Cable / Wireless switch of the SCIP tester must be in the Wireless position and the
SCIP tester must be ON.
Check if the SCIP's battery is sufficiently charged. The Bluetooth mode requires more
power than the Cable mode.
Check if a Bluetooth Partnership has been established between the Archer
SCIP tester (see Section 11.2 – Bluetooth Partnership).
Instrumentation GDD Inc.
2018-09-18
2
PDA and the
Page 63