Table of Contents
Advertisement
Annex 1 – Example of Generic Data File
Header :
Version PPC :
Version of the SCIP program on the PDA
Version SCIP :
Version of the SCIP tester software
SN :
Serial number of the SCIP tester
Project :
Name of your project
Windows :
Number of windows (depending on the selected mode)
Settings :
Selected mode (Section 8)
Delay :
Delay in ms before the first window (depending on the selected mode)
Timing :
Timing of each window (depending on the selected mode)
Readings:
Mem:
Memory number
Core ID:
Sample name or number
S(mm
2
):
Cross-sectional area of the none core sample in mm
D(mm):
Diameter of the core sample in mm
l(mm):
Length of the sample in mm
Half :
Half or full core sample
Contact(kOhm):
Sample resistance in kOhm
Rho(Ohm*m):
Resistivity of the sample in Ohm*m
Vp(mV):
Voltage at the edges of the sample (must be under 13V)
Err Vp:
Error in % of the Vp
M:
Chargeability of the sample in mV/V
Err M:
Error in % of M
I(uA):
Current sent by SCIP in uA
Time:
Transmitter timing in ms
Stack:
Number of stack
M01 – M20:
Windows of chargeability
Instrumentation GDD Inc.
2018-09-18
2
Page 70
Advertisement
Table of Contents
