Installation
4.5 Installing R/H-CPUs
Reference
Additional information can be found in the manuals for the system power supplies.
4.5
Installing R/H-CPUs
Introduction
CPUs in the S7-1500R/H redundant system are installed in exactly the same way as CPUs
in the S7-1500 automation system.
Requirements
The mounting rail is installed.
Note
Protective film
Please note that the R/H-CPUs come with a removable protective film on the display.
Tools required
Screwdriver with 4.5 mm blade
106
S7-1500R/H redundant system
System Manual, 10/2018, A5E41814787-AA