Restrictions - Siemens Simatic S7-1500R System Manual

Basics of program execution

7.2 Restrictions

7.2 Restrictions
Instructions not supported
Table 7- 1 Unsupported instructions CPU 1513R / CPU 1515R / CPU 1517H with firmware version V2.6
Instruction
Communication
GET
PUT
USEND
URCV
BSEND
BRCV
T_CONFIG
TMAIL_C (V5.0 or later)
1)
OPC_UA_Connect
OPC_UA_NamespaceGetIndexList
OPC_UA_NodeGetHandleList
OPC_UA_MethodGetHandleList
OPC_UA_TranslatePathList
OPC_UA_ReadList
OPC_UA_WriteList
OPC_UA_MethodCall
OPC_UA_NodeReleaseHandleList
OPC_UA_MethodReleaseHandleList
OPC_UA_Disconnect
OPC_UA_ConnectionGetStatus
WWW
FTP_CMD
Extended instructions
SNC_RTCB
SYNC_PI
SYNC_PO
GETIO
SETIO
GETIO_PART
SETIO_PART
D_ACT_DP
ReconfigIOSystem
WR_REC
RD_REC
RCVREC
150
Description
Read data from a remote CPU
Write data to a remote CPU
Send data uncoordinated
Receive data uncoordinated
Send data in segments
Receive data in segments
Configure interface
Transfer email
Create connection
Read namespace indexes
Get handles for read and write access
Get handles for method calls
Read node parameters
Read tags
Write tags
Call method
Enable handles for read and write access
Enable handles for method calls
Close connection
Read connection status
Synchronize user pages
Setup of FTP connections from and to an FTP server
Synchronize slave clocks
Synchronize process image inputs
Synchronize process image outputs
Read process image
Transfer process image
Read process image area
Transfer process image area
Enable/disable DP slaves
Reconfigure IO system
Write data record to I/O
Read data record from I/O
Receive data record
System Manual, 10/2018, A5E41814787-AA
S7-1500R/H redundant system