Siemens Simatic S7-1500R System Manual page 252

②
Regarding : Names of the menus
The following table shows the available menus of the display.
Table 10- 2 Names of the menus
Main menu items
S7-1500R/H redundant system
System Manual, 10/2018, A5E41814787-AA
Meaning Description
Overview The "Overview" menu contains information about:
Properties of the local CPU
•
Redundancy properties, for example
•
–
–
–
Know-how protection or serial number link
•
Properties of the inserted SIMATIC memory card
•
Diagnostics The "Diagnostics" menu includes:
Display of alarms
•
Display of the diagnostics buffer
•
Read and write access to force and watch tables
•
Display of cycle time
•
Display of memory used
•
Settings In the "Settings" menu you:
Assign IP address and PROFINET device name of the CPU
•
Set date, time of day and time zones
•
Set operating states (RUN/STOP)
•
Perform a CPU memory reset or reset to factory settings
•
Set protection level
•
Back up/restore CPU configuration to/from the SIMATIC memory card.
•
Disable/enable display with display password
•
Format SIMATIC memory card
•
Run firmware update and display status
•
Convert SIMATIC memory card or delete user program
•
Modules The "Modules" menu is not supported for R/H-CPUs.
Display In the "Display" menu you can configure settings related to the display,
such as language setting, brightness and energy-saving mode. The energy-
saving mode dims the display. Standby mode switches off the display.
Display of role (primary CPU or backup CPU)
Displaying and setting the redundancy ID
Display of the pairing state
Display
10.1 CPU display
251