Siemens Simatic S7-1500R System Manual page 296

Industrial use
The S7-1500R/H redundant system is designed for use in industrial environments. It meets
the following standards for this type of use:
● Requirements on emission EN 61000-6-4: 2011
● Requirements on immunity EN 61000-6-2: 2005
Use in mixed areas
Under certain circumstances, you can use the S7-1500R/H redundant system in a mixed
area. A mixed area is used for residential purposes and for commercial operations that do
not significantly impact on residents.
If you use the S7-1500R/H redundant system in a mixed area, you must ensure that radio
interference emission complies with the limit classes of the technical standard EN 61000-6-3.
Suitable measures for observing these limits for use in a mixed area are, for example:
● Installation of the S7-1500R/H redundant system in grounded control cabinets
● Use of noise filters in the supply cables
An individual acceptance test is also required.
Use in residential areas
Note
S7-1500R/H redundant system not intended for use in residential areas
The S7-1500R/H redundant system is not intended for use in residential areas. Using the
S7-1500R/H redundant system in residential areas can affect radio and television reception.
Reference
The certificates for the identifiers and approvals can be found in Siemens Industry Online
Support on the Internet (http://www.siemens.com/automation/service&support).
S7-1500R/H redundant system
System Manual, 10/2018, A5E41814787-AA
Technical specifications
13.1 Standards and Approvals
295