Hardware Preparation and Installation
2
EIA-232-D
EIA-530
Removal of Existing SIM
1.
Each serial interface module is retained by two 4-40 x
screws in opposite corners. Remove the two screws and store them in a
safe place for later use.
2.
Grasp opposite sides of the SIM and gently lift straight up.
C
aution
3.
Place the SIM in a static-safe container for possible reuse.
2-4
Table 2-1. Serial Interface Module Part Numbers
EIA
Configuration
Standard
DTE
DCE
DTE
DCE
SECONDARY SIDE
Figure 2-2. Serial Interface Module, Connector Side
Avoid lifting the SIM by one side only, as the connector can
be damaged on the SIM or the main board.
Part Number
Number
01-W3846B
01-W3865B
01-W3868B
01-W3867B
39
J1
40
MVME162 Embedded Controller User's Manual
Model
SIM05
SIM06
SIM07
SIM08
1
2
10922.00 9403 (2-2)
/
" Phillips-head
3
16