Synchronous Clock Select Header (J11) For Serial Port 1/Console; Clock Select Header (J12) For Serial Port 2 - Motorola MVME162 User Manual

Hardware Preparation and Installation

Synchronous Clock Select Header (J11) for Serial Port 1/Console

2
The MVME162 is shipped from the factory with the
header configured for asynchronous communications (i.e., jumpers removed).
To select synchronous communications for the
connection, install jumpers across pins 1 and 2 and pins 3 and 4.
Internal Clock (factory configuration)

Clock Select Header (J12) for Serial Port 2

The MVME162 is shipped from the factory with the
configured for asynchronous communications (i.e., jumpers removed). To
select synchronous communications for the
jumpers across pins 1 and 2 and pins 3 and 4.
Internal Clock (factory configuration)
2-6
J11
2 4
1 3
J12
2 4
1 3
SERIAL PORT 1/CONSOLE
SERIAL PORT 1/CONSOLE
J11
2 4
1 3
External Clock
SERIAL PORT 2
connection, install
SERIAL PORT 2
J12
2 4
1 3
External Clock
MVME162 Embedded Controller User's Manual
header