Specifications; Table 1-2. Mvme162 Specifications - Motorola MVME162 User Manual

– VMEbus interrupt handler
– Global CSR for interprocessor communications
– DMA for fast local memory-VMEbus transfers (A16/A24/A32,
D16/D32[D16/D32/D64BLT])
Switches and Light-Emitting Diodes (LEDs)
– Two pushbutton switches (
– Eight LEDs (

Specifications

Table 1-2, MVME162 Specifications, lists the specifications for an MVME162
without IndustryPacks. The subsequent sections detail cooling requirements
and FCC compliance.
Characteristics
Power requirements
(with PROM; without IPs)
Operating temperature
Storage temperature
Relative humidity
Physical dimensions
PC board with mezzanine
module only
Height
Depth
Thickness
PC board with connectors
and front panel
Height
Depth
Thickness
N
Refer to the following sections on Cooling Requirements and
ote
Special Considerations for Elevated Temperature Operation.
MVME162/D2
ABORT
, , ,
FAIL STAT RUN SCON

Table 1-2. MVME162 Specifications

+5V (± 5%), 3.5 A typical, 4.5 A maximum
+12 Vdc (± 5%), 100 mA maximum
-12 Vdc (± 5%), 100 mA maximum
0° to 70° C exit air with forced air cooling (see NOTE)
-40° to +85° C
5% to 90% (noncondensing)
Double-high VMEboard
9.2 inches (233 mm)
6.3 inches (160 mm)
0.66 inch (17 mm)
10.3 inches (262 mm)
7.4 inches (188 mm)
0.80 inch (20.32 mm)
Specifications
and )
RESET
, , , , and
LAN FUSE SCSI
Specifications
1
)
VME
1-3