What Is An Interface Node Ifn Vib-A - Siemens SIPLUS CMS4000 IFN VIB-A Operating Instructions Manual

Operating Instructions SIPLUS CMS4000 IFN VIB-A
2.2

What is an Interface Node IFN VIB-A?

Definition
The interface node IFN VIB-A allows the data sampling of six IEPE sensor signals or five
IEPE sensor signals and one analog signal (e.g. speed of rotation).
The maximum sampling frequency is 192 kHz per channel. The nodes are connected via
bus system (IEEE1394) with 400 Mbps with an industrial PC.
IEPE-Sensors (Integrated Electronics Piezo-Electric) are piezoelectric sensors with inte-
grated electronic.
Application Area
• The IFN VIB-A is suited for the application in the industrial environment, because of
the robust construction and the degree of protection IP67.
• The compact design of the IFN VIB-A enables the application in space-saving ranges.
• Easy handling of IFN VIB-A provides a fast commissioning and maintenance
• The product is designed for the application on a DIN Rail or for mounting angles.
Display
The IFN VIB-A has one display (LED), IEPE-Sensor connectors, IEEE1394 connections
and one connection for Power Supply.
Status Display:
• PWR (green LED)
• LNK (yellow LED)
• ERR (red LED)
Input Sensor
conections and
LEDs
(Channel 1,3,5)
Power Supply
(PWR)
IEEE1394 Connection
(LNK0)
Name Plate
(Bottom side)
Picture 2 Front view IFN VIB-A
SIPLUS CMS4000 IFN VIB-A
Operating Instructions, 11/2014, A5E02297871A-AA
Input Sensor-
connections and
LEDs
(Channel 2,4,6)
IEEE1394 Connection (LNK1)
IEEE1394 Connection (LNK2)
Label Plate
UIK - Address
8