Din Rail; Installation - Siemens SIPLUS CMS4000 IFN VIB-A Operating Instructions Manual

Operating Instructions SIPLUS CMS4000 IFN VIB-A
3.2

DIN Rail

Characteristics
The Device can be installed on a DIN rail (DIN EN 60715 TH35-15).
3.2.1

Installation

Requirements
The table-track is installed on the device.
Procedure
Hang the upper table-track of the device on the DIN rail and push it down towards the
DIN rail so that it snaps in.
Picture 4 Installation of the device IFN VIB-A on a DIN rail.
Caution
During operation with vibration load use an attachment with mounting angels
SIPLUS CMS4000 IFN VIB-A
Operating Instructions, 11/2014, A5E02297871A-AA
1
2
Siemens Parts
3
11