Siemens SIPLUS CMS4000 IFN VIB-A Operating Instructions Manual page 2

Operating Instructions SIPLUS CMS4000 IFN VIB-A
Safety Guidelines
This document contains notices which you should observe to ensure your own personal safety as well as to avoid property damage.
The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring to property
damage only have no safety alert symbol.
Danger
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Warning
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Caution
Used with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
Caution
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in prop-
erty damage.
Notice
Used without the safety alert symbol indicates a potential situation which, if not avoided, may result in an undesirable
result or state.
When several danger levels apply, the notices of the highest level (lower number) are always displayed. If a notice refers to personal
damages with the safety alert symbol, then another notice may be added warning of property damage.
Qualified Personnel
The device / system may only be set up and operated in conjunction with this documentation. Only qualified personnel should be
allowed to install and work on the equipment. Qualified persons are defined as persons who are authorized to commission, to earth,
and to tag circuits, equipment and systems in accordance with established safety practices.
Intended Use
Please note the following:
Warning
This device and its components may only be used for the applications described in the catalog or technical description,
and only in connection with devices or components from other manufacturers approved or recommended by Siemens.
Trademarks
All designations marked with ® are registered trademarks of Siemens AG. Other designations in this documentation might be trade-
marks which, if used by third parties for their purposes, might infringe upon the rights of the proprietors.
Copyright Siemens AG 2014. All rights reserved.
Reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be
liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved.
Disclaimer of Liability
We have checked the contents of this document for agreement with the hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However, the data in the manual are reviewed regularly, and any necessary
corrections will be included in subsequent editions. Suggestions for improvement are welcomed.
Siemens AG
Digital Factory, Factory Automation
Systems Engineering
P.O. Box 23 55
90713 Fuerth
Germany
SIPLUS CMS4000 IFN VIB-A
Operating Instructions, 11/2014, A5E02297871A-AA
Siemens AG 2014
Technical data subject to change
2