Spyder_OM_Book.book Page 25 Monday, January 16, 2012 11:02 AM
1 screw
3 system-board connector
CAUTION:
antistatic packaging. For more information, see "Protecting Against Electrostatic
Discharge" in the safety information that shipped with your computer.
Replacing the Mini-Card
1 Remove the new Mini-Card from its packaging.
2 Align the notch on the Mini-Card with the tab in the system-board
connector.
CAUTION:
use excessive force, you may damage the connector.
CAUTION:
resistance, check the connectors on the Mini-Card and on the system board, and
realign the Mini-Card.
CAUTION:
Mini-Card.
2 Mini-Card
When the Mini-Card is not in the computer, store it in protective
Use firm and even pressure to slide the Mini-Card into place. If you
The connectors are keyed to ensure correct insertion. If you feel
To avoid damage to the Mini-Card, never place cables under the
2
3
Wireless Mini-Card
1
25