Replacing The Palm-Rest Assembly; Postrequisites - Dell XPS 13 Owner's Manual

Spyder_OM_Book.book Page 64 Monday, January 16, 2012 11:02 AM
1 palm-rest assembly
3 display hinges (2)

Replacing the Palm-Rest Assembly

1 Slide and place the palm-rest assembly over the display assembly.
2 Press down on the display hinges and ensure the screw holes in the display
hinges align with the screw holes on the palm-rest assembly
3 Replace the four screws (two on each side) that secure the palm-rest
assembly to the display assembly.

Postrequisites

1 Replace the keyboard. See "Replacing the Keyboard" on page 55
2 Replace the system board. See "Replacing the System Board" on page 48
3 Replace I/O board. See "Replacing the I/O Board" on page 42
4 Replace the power-adapter connector. See "Replacing the Power-Adapter
Connector" on page 39
64
Palm-Rest Assembly
2 screws (4)
1
2
3