Spyder_OM_Book.book Page 31 Monday, January 16, 2012 11:02 AM
Heat Sink
WARNING:
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 13
2 Remove the battery. See "Removing the Battery" on page 17
Removing the Heat Sink
1 In sequential order (indicated on the heat sink), remove the four screws
that secure the heat sink to the system board.
2 Lift the heat sink away from the system board.
Before working inside your computer, read the safety information
9
2
1
Heat Sink
31