Spyder_OM_Book.book Page 15 Monday, January 16, 2012 11:02 AM
Power-Light Board
WARNING:
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 13
Removing the Power-Light Board
1 Lift the connector latch and pull the pull-tab to disconnect the power-
light board cable from the connector on the I/O board.
2 Remove the screw that secures the power-light board to the palm-rest
assembly.
3 Lift the power-light board off the palm-rest assembly.
Before working inside your computer, read the safety information
4
Power-Light Board
15