Spyder_OM_Book.book Page 48 Monday, January 16, 2012 11:02 AM
1
keyboard cable
Replacing the System Board
1 Slide the keyboard cable into the system-board connector and press down
on the connector latch to secure the keyboard cable. to the system-board
connector.
2 Align the screw holes on the system board with the screw holes on the
palm-rest assembly.
3 Replace the four screws that secure the system board to the palm-rest
assembly.
4 Connect the display cable and the power-adapter connector cable to the
system board connectors.
5 Slide the touchpad cable and keyboard backlight cable into the system-
board connectors and press down on the release latch to secure the cables.
Postrequisites
1 Replace the fan. See "Replacing the Fan" on page 35
48
System Board
1