Spyder_OM_Book.book Page 17 Monday, January 16, 2012 11:02 AM
Battery
WARNING:
that shipped with your computer and follow the steps in "Before You Begin" on
page 9. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 13
2 Remove the power-light board. See "Removing the Power-Light Board" on
page 15
Removing the Battery
1 Disconnect the battery cable from the system-board connector.
2 Remove the eight screws that secure the battery to the palm-rest assembly.
3 Lift the battery off the palm-rest assembly.
Before working inside your computer, read the safety information
5
17
Battery