Global Edit Mode - Korg Minilogue XD Owner's Manual

GLOBAL EDIT mode

Button 3 (GLOBAL 1)
This button sets the parameters related to the overall pitch (how high or low the sound is). These
functions control the tuning and transposition of the minilogue xd.
Master Tune
This adjusts the overall tuning of the entire minilogue xd in one-cent units (semitone = 100 cents),
over a range of ±50 cents.
0: A4 is equal to 440 Hz.
Transpose
Sets the pitch in semitones. The range you can set is within one octave, up and down.
Button 4 (GLOBAL 2)
Metronome
Sets whether the metronome will sound during real-time recording.
D. Pedal Polarity
Sets polarity to the same polarity as the damper pedal that is connected to the DAMPER jack. If
the polarities do not match, the damper pedal will not operate correctly.
– (KORG): Use this setting when connecting an optional DS–1H damper pedal (sold separately) or
a PS-3/PS-1 pedal switch (sold separately). The polarity of Korg damper pedals and pedal switch-
es is "–" (  : open type).
+: Use this setting when connecting damper pedals with a "+" polarity (  : closed type). If the
polarities do not match, the damper pedal will not operate correctly.
Local SW
Sets whether the minilogue xd's keyboard will control the internal tone generator. Normally, this
is "On." However, if you are using the minilogue xd with an external sequencer or sequencing
software, you will want to set the local connection to "Off" to eliminate the double-triggering of
notes caused by MIDI echo.
Off: The minilogue xd's keyboard will be internally disconnected from the tone generator.
Velocity Curve
This selects how the minilogue xd changes the volume and sound, in response to velocity (how
hard you strike the keys).
127
64
8
7
1
Soft Keyboard
[–50 Cent...0 Cent...+50 Cent]
[–12 Note...0 Note...+12 Note]
[Off, On]
[– (KORG), +]
[Off, On]
[Type 1...8, Const 127]
6
5
4
3
2
1
Strong
39