Korg Minilogue XD Owner's Manual page 38

Button 7 (SEQ CLEAR)
This function provides a convenient way to delete all data within a specific sequence.
All Clear
When using All Clear, all notes and motion sequences contained within the sequence data will be
deleted.
Turn the PROGRAM/VALUE knob until "Press WRITE" is indicated in the display.
Press the WRITE button to delete. The display will then indicate the message "Cleared".
Motion Clear
With Motion Clear, only the motion sequences contained within the sequence data will be deleted.
Turn the PROGRAM/VALUE knob until "Press WRITE" is indicated in the display.
Press the WRITE button to delete all of the motion sequence data. The display will then indicate
the message "Cleared".
Button 10 (MOTION CLEAR)
MOTION CLEAR (1...4)
You can delete motion sequences one at a time here. See "Deleting a motion sequence" (p.27) for
details.
While the SHIFT button is pressed, the MOTION VIEW screen will be displayed, where
Tip:
you can see the graphics for the motion sequences you have recorded.
Button 11 (MOTION ENABLE)
MOTION ENABLE (1...4)
Use this to enable or disable motion 1–4.
OFF: The motion sequence will be disabled, and the parameters will not change (the recorded mo-
tion sequence will not be deleted).
Press button 11 to select the motion sequence to configure, and turn the PROGRAM/VALUE knob
to select either "OFF" or "ON".
While the SHIFT button is pressed, the MOTION VIEW screen will be displayed, where
Tip:
you can see the graphics for the motion sequences you have recorded.
Button 12 (MOTION SMOOTH)
MOTION SMOOTH (1...4)
The motion of a motion sequence (Motion 1–4) can step from one value to the next, or it can transi-
tion smoothly from one value to the next by applying MOTION SMOOTH.
OFF: The motion sequence will make changes to the sound in steps.
ON: The motion sequence will change smoothly, and make smooth changes to the sound.
Press button 12 to select the motion sequence to configure, and turn the PROGRAM/VALUE knob
to select either "OFF" or "ON".
Tip: While the SHIFT button is pressed, the MOTION VIEW screen will be displayed, where
you can see the graphics for the motion sequences you have recorded.
[OFF, ON]
[OFF, ON]
38