Korg Minilogue XD Owner's Manual page 36

Button 10 (MULTI ENGINE)
This button configures the MULTI ENGINE settings.
The parameters that are displayed will change, depending on the settings in "NOISE/VPM/USR
switch" (p.17), MULTI ENGINE.
When the noise generator is selected
There are no parameters to set for the noise generator.
When the VPM oscillator is selected
The VPM oscillator has 16 types, each with six parameters.
You can set these parameters to make changes to the sound.
If all parameters are set to "0%", the effects set in the types will be used, and the effect will in-
crease as the value is increased (+).
Parameter 1 (Feedback)
Sets the depth of the modulator feedback.
Parameter 2 (Noise Depth)
Adjusts the depth of the noise modulation.
Parameter 3 (Shape Mod Int)
Adjusts the depth of the internal EG effect.
Parameter 4 (Mod Attack)
Adjusts the attack time of the internal EG.
Parameter 5 (Mod Decay)
Adjusts the decay time for the internal EG.
Parameter 6 (Mod Key Track)
Adjusts the depth of the modulator effect via keyboard tracking. The higher the sound frequency,
the less noticeable the effect becomes.
When the user oscillator is selected
See the "logue SDK" (www.korg.com) for details.
Button 12 (PROGRAM NAME)
PROGRAM NAME
You can create a program name up to 12 characters in length.
Rotate the PROGRAM/VALUE knob to select the desired character, then press button 12 to move the
cursor to the next position.
[–100%...0%...+100%]
[–100%...0%...+100%]
[–100%...0%...+100%]
[–100%...0%...+100%]
[–100%...0%...+100%]
[–100%...0%...+100%]
36