Global Edit Mode - Korg minilogue Owner's Manual

GLOBAL EDIT mode

Unlike PROGRAM EDIT and SEQ EDIT parameters which apply only to the
current Program GLOBAL EDIT functions apply to the entire minilogue uni-
versally.
GLOBAL EDIT mode parameters are assigned to buttons 1–7.
Button 1 Button 2
GLOBAL 1 GLOBAL 2
Master Tune Knob Mode Sync In Unit MIDI Ch
Transpose Audio In
Local SW
Velocity
Curve
Button 1 (GLOBAL 1)
Common to both Oscillators, these functions control the tuning and transposi-
tion of the minilogue.
Master Tune
This adjusts the overall tuning of the entire minilogue in one-cent units (semi-
tone = 100 cents), over a range of ±50 cents.
0: A4 is equal to 440 Hz.
Transpose
Transposing the keyboard allows you play in a different key using familiar fin-
gerings on the keyboard.
Button 3 Button 4
GLOBAL 3 GLOBAL 4
Sync Out Clock
Unit Source
Sync In Po- Enable Rx
larity MIDI
Sync Out Enable Tx
Polarity MIDI
MIDI Route
[−50 Cent...+50 Cent]
[−12 Note...+12 Note]
40
Button 5 Button 6
GLOBAL 5 GLOBAL 6
Parameter
Brightness
Disp
Auto Power
Oscilloscope
Off
Button 7
GLOBAL 7
All Dump
(USB)
All Dump
(MIDI)